Orifice devices

In process engineering, throttle orifice plates are used for a variety of tasks. For example, to limit a flow or to hold a pressure in front of the orifice plate. Since throttle orifice plates are also sometimes required in our process engineering modules, we have developed two variants, which we offer separately for sale. The throttle discs are provided with a centering hole which you can drill to the required size.

Mausrad 3 Please scroll down completely                                                                                                                    2019-09-18; temp noJW

Hygienic type

Perfectly suited for the food industry or pharmaceutical industry

This design is free of dead space. The gasket is perfectly seated flush with the pipe diameter on both sides of the throttle orifice. If it is necessary for the throttle to drain, the throttle must be installed in a vertical pipeline. The throttle point can be supplied in a high-pressure version. Then stronger screws and a thicker throttle plate are used. The throttle plate can be made of almost any metallic material. As standard, we deliver the throttle plate in material AISI 316 and in a material thickness of 3mm. For each throttle point device our scope of delivery consists of two grooved flanges, two gaskets, the screws including the nuts and any number of throttle plates. The throttle discs are provided with a 5mm centering hole. You can try out a variety of throttle bores and mark the selected bore diameter on the tongue of the throttle disk. The throttle point is designed for the pipe system DIN EN 10357 and can be supplied in nominal sizes from DN15 to DN 200.

MultiFood Degasser 150

Type for welding neck flanges

Perfect for supply media (steam, refrigerant, coolant, ...)

This design is intended for conventional welding neck flanges. The throttle can be manufactured for any flange standards. The throttle point can be supplied in a high-pressure version. Then a thicker throttle plate is used. The throttle plate can be made of almost any metallic material. As standard, we deliver the throttle plate in material AISI 316. Per throttle point, our scope of delivery consists only of the ordered number of throttle plates. The throttle plates are provided with a 5mm centering hole. You can try out a variety of throttle bores and mark the selected bore diameter on the tongue of the throttle disk.


 

Wanted

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.